先到
http://wiki.openwrt.org/toh/tp-link/tl-wr1041n ,下载
http://downloads.openwrt.org/snapsho...fs-factory.bin ,里边有简单的教程,不过是英文的.
进tplink的界面,直接用这个包升级.
升级完成后,因为原厂没http界面,所以要手动装.
用secureCRT之类的telnet软件,地址填192.168.1.1,进入路由管理界面,
输入
代码:
vi /etc/config/network
编辑网络配置文件,
按inert键,然后按右键粘贴下边内容,再按一下ESC键,输入 :wq ,保存退出.
代码:
config interface 'wan'
option ifname 'eth0.2'
option proto 'pppoe'
option username '你的ADSL帐号'
option password '你的ADSL密码'
然后就可以上网了,上网后,可以开始安装软件,原厂4M rom实在太小,只安装Luci管理界面,安装Luci 中文包,multiwan多拨管理这几个.
代码:
root@OpenWrt:/#/etc/init.d/network restart
root@OpenWrt:/#opkg update
root@OpenWrt:/#opkg install luci
root@OpenWrt:/#opkg install luci-i18n-chinese
root@OpenWrt:/#opkg install luci-app-multiwan
root@OpenWrt:/#/etc/init.d/uhttpd enable
root@OpenWrt:/#/etc/init.d/uhttpd start
http管理界面完成.